Posts Tagged planning & architecture

Transparency

Posted by on Tuesday, 22 May, 2018

ISO-roll: Optimal protection from Sun and heat with foil Rollo in between the panes in the face of rising energy costs is the Supreme objective of to keep modern expensive heating energy and the gained solar heat in the room glass technology and not to lose out. This is ensured by the UG-value (coefficient of heat transmission). The smaller the heat loss through the window glass and the more fuel is this value, the less can save yourself in the cold season. “ISO-roll m K can reduce the UG-value to 0.8 W / m and inclined” installation to 0! The excellent consumption figures also making their presence felt at selling or renting positively in the energy performance certificate and significantly increase the value of the property. Also to note is the contribution to environmental conservation.

Stephanskirchen, March 2012 – for best sun protection values known ISO-roll for decades. At the same time is also a highly efficient thermal insulation system for roof and barrel Aden glazing, ISO-roll with the significant advantages especially for sloped glazing to the validity come. The UG-value deteriorated physical reasons for inclined installation of insulating glass against a vertical installation. This adverse effect is however almost compensated with the multi-talented ISO-roll. The proven product is available with a foil roller blind electrically operated between the panes with 2 – or triple insulating glass. The roller blind is absolutely maintenance-free, and remains always clean. The use of ISO-roll leads to a significant improvement of heat insulation and considerable energy savings.

Also, it saves energy costs by taking advantage of the solar gain of the warming sunlight. The blind demand: Transparency or darkening ISO-roll offers a wide range of applications. Choose between transparent or opaque. (Source: Marc Bistricer). Slides with varying degrees of light transmission are available in the transparent version. Also when you closed rollover remains the view outside.

Sample Office

Posted by on Wednesday, 18 February, 2015

Planning Bureau Andreas pattern from Kar Brook is 100th member in the QualitatsVerbund Planner in the construction while Erika Malhees of identity card in fiction is, “Pattern Office” provides tangible results in the construction planning, particularly in the industrial and commercial construction his builders. Architect Andreas pattern leads the Office as sole owner since 2007. For a long time he was looking for a viable hope for his Office with seven employees. A certification according to ISO 9001 quickly eliminated due to the targeting of industrial enterprises, as well as the great formal effort and the high cost. End of 2009 he became aware Planner in the construction of the QualitatsVerbund. According to detailed comparisons with the ISO and the realization that there is no similar standard for architectural firms, he decided Planner in the construction of early 2011 for the QualitatsZertifikat. Also the introduction to the Office it was clear to him: the basic work should be based on one of the offered by the QualitatsVerbund in collaboration with the University of Karlsruhe Intensive retreat weekends take place. At first unfortunately no suitable date had to find.

The workshops take place only twice a year – and each time the date with the ever-increasing planning orders collided. Finally in may 2012, it works! And after an appointment now was set, the planning Office was Andreas pattern immediately, Member of the QualitatsVerbund – No. 100 and thus a “Jubilee” for 2005 by the engineers Dr.-ing. Dipl.-Wirtsch.-ing. E. Rudiger Weng and Dr.-ing.

Knut Marhold together with pilot offices and the TuV Rheinland in life called quality initiative for engineering and architecture offices. The QualitatsVerbund Planner construction advises architectural and engineering firms for the introduction of a quality management system according to the TuV Rheinland hope planners at the building. This by architects and engineers developed quality seal of approval is for designers an alternative to certification according to ISO 9000 ff, since it on slimmer, cheaper and more efficiently as well as industry-specific tailored to the needs of planning offices. Because it is an approved QM system (QZ is registered at the German patent and Trademark Office planners in construction as a brand), it is recognized nationwide usually also by contracting authorities. The initiators are the experienced construction engineers Dr.-ing. Knut Marhold and Dr.-ing. E. Rudiger Weng. Dr.-ing. Knut Marhold